How To: Change Your Ip In Less Then 1 Minute:--

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "cmd" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.

Source:- The Hacking Saga

Countdown timer for shutdown computer:--

Many a times people like to sleep on music, but the problem is that the comp will continue running the whole night. Here is how you can create a countdown timer to shutdown your comp in your specified time.

Go to run in start menu and input this command

shutdown -s -t 3600

this will create a countdown timer which will go off in 3600 seconds (1 Hour). you can replace the 3600 to any time limit you want the comp to shutdown ,but remember the time should always be expressed in seconds i.e if u want the comp to shutdown in Half an hour you have to write 1800 and so on...

If you are as lazy as me and don't want to input the command each time, then create a batch file or shortcut

Batch:
open a notepad and type

shutdown -s -t 3600

now in the files menu select "save as" and save this file as Activate.bat

Just double clicking this file will activate your timer

Shortcut:
On the desktop right click and create a new shortcut. in the location type

shutdown -s -t 3600
Give it any name like "Activate timer"
Again, double clicking this newly created shortcut will do the same.

FORCING THE SHUTDOWN:

another operator that you can use with this command is -f . this will force a shutdown on system. suppose you want the comp to shutdown as quickly as possible you can give command

shutdown -s -f -t 00

here we have used a -f operator and the delay is set to 0 seconds.

(as we are talking about quick shutdown, u can use command
c:windowssystem32tsshutdn.exe 00 /POWERDOWN /DELAY:00 also)

STOPPING THE TIMER:
Any time when you want to stop the running timer use a -a operator(standing for abort)

the command is

shutdown -a

You can use it in any way u prefer, like direct input in run (or command prompt) , create a .bat file or create a shortcut on desktop

SOME OTHER OPTIONS:

shutdown -r (restarting)
shutdown -r -t 3600 (timer for restarting in 1 hour)
shutdown -r -f -t 00 (quick reboot)

Source:- The Hacking Saga

T8951 root

Driver ေလးကို ဒီမွာ ေဒါင္းလိုက္ပါ။
sp flashtoolကို ဒီမွာေဒါင္းလိုက္ပါ။
MT6577_Android_scatter_emmc.txt ကို ဒီမွာေဒါင္းပါ
flashtool.exe ကို ဖြင့္ပါ။ၿပီးရင္ scatter-loading ထဲ၀င္ၿပီး MT6577_Android_scatter_emmc.txt ကိုေရြးေပးလိုက္ပါ။ၿပီးရင္ download
ဖုန္းကို ပါ၀ါပိတ္ပါ usbထိုးပါ
အစိမ္းေရာင္အကြက္ေလးေပၚလာရင္ရပါျပီ

root ဖို႔အတြက္က ႀကိဳက္တာနဲ႔သာ root ေပေတာ့ဗ်ာ....
မူရင္း.....http://bbs.hiapk.com/forum.php?mod=viewthread&tid=4511048&fromuid=10313285
firmware အတြက္လိုအပ္ခဲ့ရင္
ဒီမွာ ေဒါင္းလိုက္ပါ။

မိမိဖုန္း မွ တဆင့္ ေငြျဖည့္ကဒ္ လႊဲေျပာင္းေပးနည္း

မိမိဖုန္း မွ တဆင့္ ေငြျဖည့္ကဒ္ လႊဲေျပာင္းေပးနည္း

(မသိေသးေသာ သူမ်ားအတြက္)

GSM ေငြျဖည့္ကဒ္ လႊဲေျပာင္းနည္း

GSM ဖုန္းတစ္လုံးကေန တစ္လုံးကုိ Phone Bill လႊဲတဲ့ code ျဖစ္ပါတယ္။
*123*Pin No*phone no # then call

(ဥပမာ- *123*217675393302988839*092003747#) ျပီးလွ်င္ call လုိက္ပါ။

CDMA ေငြျဖည့္ကဒ္ လႊဲေျပာင္းနည္း

CDMA ဖုန္းတစ္လုံးကေနတစ္လုံးကုိ Phone Bill လႊဲတဲ့ code ျဖစ္ပါတယ္။

*166* Pin No * Phone no # then call

(ဥပမာ- *123*217675393302988839*091045019#) ျပီးလွ်င္ call လုိက္ပါ။
Ref>>>Myanmar Mobile Users Group